热情接待我们一起
赵序林 ：13776367918
物品简介
产物用处 | 商标 | 粘度 | 伸长率 | 剥离技术刚度Peelstrength（N/3cm) | 森林测试 | 特色及用处 |
服装网www.vhao.net网www.vhao.net革 | XCNS-2003A | 1000-1500 | 1.01-1.02 | 20-30 | ≥8 | 低对抗强度(模量)全聚醚型无有机溶剂发泡环氧树脂、高生长率、不能则呈现出死皱。Low hardness (modulus) all polyether solvent-free foaming resin, high elongation, and less prone to wrinkling. |
| XCNS-2003-1B | 1000-1500 | |||||
沙发革 | XCNS-3008A | 1000-1500 | ≥500 | 50-70 | ≥8 | 全聚醚型发泡树脂，高温不结品，可操纵性好，具备4min操纵时候，泡孔细致肉感强。 |
| XCNS-3008B | 1000-1500 | |||||
吸纹沙发革 | XCNS-3011DA | 1000-1500 | ≥600 | 50-70 | ≥8 | 聚醚型发泡树酯，吸纹最终结果好，抗磨损耐刮，泡孔认真细致肉感太强，合适于卡座沙发革。Polyether foam resin has good wrinkle absorption effect, is wear-resistant and scratch resistant, has delicate and fleshy pores, and is suitable for sofa leather. |
| XCNS-3008B | 1000-1500 | |||||
活动鞋革 | XCNS-3030HA | 2000-2500 | ≥700 | 80-100 | ≥6 | 酯醚共聚型无泡孔光敏树脂，低温塑性好，剥离技术高，必备条件3-4min 操控期间，好用于活動鞋革。Ester ether copolymer type non porous resin, with good low-temperature toughness, high peeling, and 3-4 minutes of operation time, suitable for sports shoe leather. |
| XCNS-3030HB | 4000-6000 | |||||
无泡孔底料 | XCNS-4060A | 5000-8000 | ≥700 | 70-80 | ≥3 | 中等水平密度(模量)共聚型无泡孔树脂材料，享有10min使用情况下、4-5min 可成长、可涂装 10 丝低于、3 年耐电离。Medium hardness (modulus) copolymer type non porous resin, with a 10 minute operating time, 4-5 minute curing time, can be coated with less than 10 threads, and 3 years of hydrolysis resistance. |
| XCNS-4060B | 2000-2500 | |||||
镜面革 | XCNS-4070A | 2000-2500 | ≥700 | 70-90 | ≥3 | 高对抗强度(模量)共聚型无泡孔树脂胶，完整版无皱褶、具备条件7min操作同时、5-6min 可真空干燥、两年耐淀粉水解膜，规格方便于放肆、生产出来技艺简化、法律效力高。High hardness (modulus) copolymer type non porous resin, completely wrinkle free, with a 7-minute operation time, 5-6-minute curing time, 3-year hydrolysis resistant film, easy thickness control, simple production process, and high efficiency. |
| XCNS-4070B | 6000-10000 | |||||
汽车革 | XCNS-5002A | 1500-2000 | ≥700 | 60-80 | ≥8 | 聚醚型微孔板聚酯树脂，适中模量，耐淀粉水解5年，高剥离技术，使用手感佳，共用于汽车汽车坐椅革。Polyether type microporous resin, medium modulus, water-resistant for 8 years, high peel off, good hand feel, suitable for automotive seat leather. |
| XCNS-5002B | 4000-6000 | |||||
电子包装革 | XCNS-3015A | 1000-1500 | ≥700 | 50-70 | ≥7 | 聚醚型无泡孔硅橡胶，可使用性好，节能环保离子液体程序，握感绞紧，该用于智能封装革。Polyether type non porous resin, with good operability, environmentally friendly catalytic system, and a stiff hand feel, can be used for electronic packaging leather. |
| XCNS-3015B | 1000-1500 |
